Optical Accessories
Prisms & Targets


includes 7.4V Li-Ion battery
Maintain target lock with confidence using Trimble Active Tracking technology and selecting from 8 different channels. This target can also work as a passive 360 prism.
Target height - Trimble Standard - 135mm
Prism Constant: +10mm
P/N: MT1000

includes 7.4V Li-Ion battery
Maintain target lock with confidence using Trimble Active Tracking technology and selecting from 8 different channels. Target has 360 foil and a single ring of LED's for Active Tracking.
Target height - Trimble Standard - 135mm
Prism Constant: +22mm
P/N: AT360

Includes height adapter to Trimble Standard target height (135mm). Height adapter is used in conjunction with the telescoping rod.
This 360 prism is compatible with all optical instruments and also supports all GNSS receivers for integrated surveying with a built-in 5/8th thread. A levelling bubble is also included, built into the 5/8th thread.
Perpendicular markings on the prism cap simplify offset measurements.
Prism Constant: +2 mm
Integrated survey offset of 34 mm
P/N: 58020002

Replacement top cap only for the Trimble 360 Prism
P/N: 59050002
Replacement height adapter only for the Trimble 360 Prism
P/N: 59054002

includes height adapter to Trimble Standard target height (135mm)
The 360 prism designed for Integrated Surveying with the Trimble R10 GNSS receiver. Compatible with all optical instruments.
Prism Constant: +2mm
P/N: 58012029

includes height adapter to Trimble Standard target height (135mm)
The mainstay basic 360 prism, compatible with all Trimble instruments and GNSS receivers (excluding the Trimble R10) for Integrated Surveying.
Prism Constant: +2mm
P/N: 58128001

Contains case, traverse prism, prism base (with level and optical plummet), and tribrach (with no plummet).
The prism base with level has a lever arm with bottom notch measurement that enables accurate height measurements and removes the need to remeasure when pairing with an S Series or SX10 instrument.
P/N: SLSU-S2019

Traverse prism with sighting target.
Target height - Trimble Standard - 135mm
Prism Constant: -35mm
P/N: 58026019

Includes 4 piece pole and carry case.
Prism Constant: -18mm
P/N: 571126273

25mm Prism - Box of 25
Can be mounted horizontally or vertically.
Prism Constant: -17mm
P/N: 58008030

62mm Prism
Prisim constant: -40mm
P/N: 58008042

62mm Prism
5/8th thread mount on top for GNSS receiver.
P/N: 58008040

Contains 1 x 25*25mm and 1 x 60*60mm reflective foil target stickers. Only suitable for manual aiming.
Prism Constant: 0mm
P/N: 57012007

Prism constant: +2mm
P/N: 571204312

Pairing the VX&S-Series 360 Prism with the Target ID module to to ensure you find and measure the correct target using Trimble Active Tracking technology.
Prism Constant: +2mm
P/N: SLSU-S2003

includes mini rod
Pair either the VX&S-Series 360 prism or the R10 360 Prism with the Target ID module to ensure you find and measure the correct target using Trimble Active Tracking technology.
P/N: 58009009

Single Trimble traverse prism without sighting target.
Prism Constant: -35mm
P/N: 58024019

Replacement sighting target for Trimble traverse prism.
P/N: 58025007

Mini Rod Extension for 360 Prism or Target ID including 0.040m 5/8 thread adapter. Total height of mini rod 0.115m.
Part #: 59009025

Adapter for Trimble VX&S Series 360 Prism, so prism is at Trimble Standard target height (135mm)
P/N: 59011025

Prism base containing built in optical plummet, plate bubble for accurate levelling and lever arm for accurate height measurements to bottom notch for both S Series and SX10 instruments.
P/N: 78608019

Holder for external GPS sensor. Attaches on top of MT1000 target via 5/8th thread mount.
P/N: 58015013

Pack of 10 adhesive black & white checker targets. Only suitable for manual aiming.
P/N: 28740034

210mm x 240mm - 2 Pack
Black and white target on hard plastic
P/N: 55001469

Target for checking and adjusting the alignment of the laser pointer on an S Series instrument
P/N: 57013007
Tribrachs


Tribrach with both an optical plummet on the tribrach, as well as an optical path for the instrument or prism base plummet.
Replacement tribrach for the Trimble SX10 instrument, also compatible with Trimble S Series instruments.
P/N: 70600007

Replacement Tribrach for Trimble S Series instruments or Trimble Traverse Prism kit. Also compatible with Trimble SX10 instrument.
P/N: 78607007

Tribrach with optical plummet for prisms, targets or GNSS setups.
P/N: 58002007

Laser tribrach with red dot, removable battery pack with micro usb slot for charging. Comes with micro usb to usb cable for charging.
P/N: 78606010
Tripods & Rods


The Tri-Max has fiberglass legs and a dual clamp locking system. Supports equipment up to 30 kg (65lb) and weighs 7.70kg (17.00lb). A retaining system prevents leg kick out and accidental falls on slick surfaces.
P/N: 90553-TR-SUR

Wooden tripod with leg screw clamping system
P/N: 571126275

Wooden tripod with lever locking system
P/N: 12178

Markings offset by Trimble Standard target height (135mm)
Carbon fiber and aluminium telescopic range pole - 2.6 meter.
P/N: 51003007

Markings read to the top of the pole.
Carbon fiber and aluminium telescopic range pole - 2.5 meter, with bipod and carry bag.
P/N: 43169-20

Markings read to the top of the pole.
Carbon fiber and aluminium telescopic range pole - 2.5 meter.
P/N: 43169-30

Fixed height two part, 2 meter, carbon fiber range pole with bipod and carry bag
P/N: 43169-00

Fixed height two part, 2 meter, carbon fiber range pole
P/N: 43169-10

Yellow bipod for use with Trimble range poles.
P/N: 571126286

Pond bubble for pole or wall mount.
P/N: 571190711
Batteries, Chargers & Cables


10.8V, 6500mAh
Lithium Ion battery for use with Trimble SX10 and S Series instruments.
P/N: 99511-30

7.4V, 2800mAh
Battery for use with the Trimble MT1000 and AT360 active targets and Trimble GNSS Receivers (excluding R10 Receiver)
P/N: 92670

12V Power supply for Trimble SX10 and S Series instruments. For indoor use only. Worldwide variant comes with adapters for worldwide use.
P/N: 51697-XX*
*XX denotes power cord region
00 = Worldwide
02 = Japan

2.5m Hirose 6 pin to USB
Black instrument to USB communication cable for Trimble SX10 instruments.
P/N: 53099032

2.5m Hirose 6 pin to USB
Grey instrument to USB communication cable for S Series instruments.
P/N: 73840019

includes 1 vehicle adapter
Charger kit containing 2 dual slot chargers with power supplies and power cords. For your Trimble optical instrument batteries (99511-30) and Trimble GNSS receiver batteries (89840-00 and 92670). The kit also includes a vehicle adapter (89844-00) for increased versatility.
P/N: 101070-02-XX*
*XX denotes power cord region:
01 = North America
02 = Japan
04 = Europe
08 = UK
09 = Taiwan
10 = China
12 = Australia

Dual slot battery charger with power supply and cord for your Trimble optical instrument batteries (99511-30) and Trimble GNSS receiver batteries (89840-00 and 92670).
P/N: 101070-00-XX*
*XX denotes power cord region:
01 = North America
02 = Japan
04 = Europe
08 = UK
09 = Taiwan
10 = China
12 = Australia

Replacement power supply and regional specific power cord for the Trimble dual slot battery charger.
P/N: 101071-00-XX*
*XX denotes power cord region:
01 = North America
02 = Japan
04 = Europe
08 = UK
09 = Taiwan
10 = China
12 = Australia

Power supply adapter for vehicle cigarette socket, compatible with Trimble dual slot battery chargers.
P/N: 89844-00

Case for dual slot chargers (58386001), 3 instrument batteries and 3 bay battery holder + cable.
Note, chargers sold separately.
P/N: SLSU-S2018-3

Case for dual slot chargers (58386001) and 2 instrument batteries.
Note, chargers sold separately.
P/N: SLSU-S2018-2

External 3 bay battery holder for use with Trimble SX10 and S Series instruments.
Cable 73838019 is sold separately and required for connection to instruments.
P/N: 59369-00

2.5m, Hirose 6 pin to Hirose 6 pin
Cable for use with external 3 bay battery holder (59369-00)
P/N: 73838019

3.0m, Battery (croc clips) to Hirose 6 pin
Cable for powering Trimble SX10 and S Series instruments from an external battery. For use with a Trimble SX10 instrument, it is recommended to use a 3A fuse (not included).
P/N: 73836019

3.0m Hirose 6 pin to Cigarette Lighter
Cable for powering Trimble SX10 and S Series instruments via a cigarette lighter socket.
P/N: 73835019

2.5m, Hirose 6 pin to DB9 female RS232
Communication cable for Trimble S Series instruments
P/N: 53002021
Backpack & Cases


Transport case for all Trimble S Series instruments. Contains backpack straps for extra transportation versatility.
P/N: 58080010

Transport case for Trimble SX10 instrument. Contains backpack straps for extra transportation versatility.
P/N: 58045032

Hard case for TSC7 controller and accessories including 360 Prism
Case contains spaces for:
- TSC7 controller, pole bracket, power cable, dual slot battery charger and 2 spare batteries.
- 2 x Dual slot chargers + power cables
- Trimble 360 Prism (MT1000, AT360, R10 360 or VX&SSeries360)
- 1 x MT1000/R-Series Receiver battery
- 2 x Total station batteries
- 2 x Spare antenna slots
Outer Case Dimensions: 466mm x 351mm x 286mm (18.36” x 13.82” x 11.26”)
P/N: 121360-01-1

Softshell backpack for Trimble S Series and VX instruments
- Main compartment with foam insert for all Trimble S Series and VX instruments
- Large front pocket for data collector
- Small front pocket for small item storage
- Side pockets for additional storage
- Webbing system on both sides and bottom of backpack for securing additional equipment
P/N: SSERIES-BP-01

Transport case for the Trimble DiNi level. Compatible with both 0.3mm and 0.7mm instruments.
P/N: 78010017

Transport case for the Trimble traverse kit.
P/N: 58395020

Transport case for the Trimble traverse prism, base with level and tribrach.
P/N: 58392001

Case for holding 2 x Dual slot chargers, 4 batteries, 3 battery external holder and associated cables.
P/N: 58386001

Case for transporting the Trimble 5 Slot battery charger, 3 batteries, 3 battery external holder and associated cables.
P/N: 58391001

Case for the TCU Robotic holder and associated accessories
P/N: 58383001

Case for the Trimble TSC3 controller and associated accessories
P/N: 58385001-SUR

Transport case for Trimble C Series instruments and accessories
P/N: HQU97000

Replacement straps for SX10, VX and S Series instrument transport case (excluding S3).
P/N: 59052025

Replacement straps for S3 instrument transport case.
P/N: 58007010
Miscellaneous


2.4 GHZ replacement antenna for SX10 Instrument.
P/N: 59429025-GEO

Pack of 5
2.4GHz TNC/R replacement antenna for S Series instruments.
P/N: 59276025-GEO

Rain cover for all Trimble Optical Instruments
Part #: 51002007

7.5 m / 24.6 ft
Metric and tenths graduations
P/N: 52618

Bracket for the mechanical mounting of the Trimble TDC600 controller onto a Trimble S Series Total Station. Connection to the S Series instrument from the TDC600 for onboard operation is via Bluetooth.
P/N: SSERIES-CB-10

Allows communication between Trimble robotic-enabled total stations and Bluetooth-enabled devices. Providing seamless integration to robotic total stations through a wider range of data collectors—without compromising range or robotic functionality.
Note this accessory is not compatible with Trimble SX10 Instruments or Trimble T10 Tablet controllers.
P/N: 93675-00

Compatible with S Series total stations
P/N: 78500007

Compatible with all S Series instruments
P/N: 78200007

Rain lens cover for S Series instruments
P/N: 50013001

15mm Lens aperture for Trimble S Series instruments when using FineLock
P/N: 51030010

Cover for Trimble CU attachment panel on S Series instruments.
P/N: 50014012-SUR

For radio communication to an instrument from a device that does not have a built in radio, such as a computer. Connects via a 12 pin cable connection from the radio to a DB9 connector on the device. Commonly used in monitoring installations with a Moxa box installation.
P/N: 58050019
C Series Specific


3.6V, 6700mAh
Lithium Ion battery for Trimble C Series instruments
P/N: 67201-01-TNL

Traverse kit and case for C Series instruments.
Prism Constant: -30mm
P/N: 2159-04-BLK-TNL

Charger for C Series batteries. Power supply sold separately (PN: 67901-09-SPN)
P/N: HQJ27000-TNL

Power supply for dual battery charger.
P/N: 67901-09-SPN

1.5m
Instrument to USB communication cable for C Series instruments.
P/N: HQK45000

2.5m
Communication cable for Trimble C Series instruments
P/N: HXE21214

Pack of 2
Ultra Clear screen protectors for the Trimble C5 instrument control panel.
P/N: 67201-08

Pack of 2
Anti Glare screen protectors for the Trimble C5 instrument control panel
P/N: 67201-14

Provides an overall magnification of 18x.
P/N: HEK01000-SPN

Provides an overall magnification of 36x.
P/N: HEK02000-SPN

P/N: HED14002

52mm Solar filter for C Series instruments
P/N: HXA20579-SPN

Mounts to instrument handle with compass bracket (P/N: HNB30310)
P/N: HEC21001-SPN

Bracket to mount tubular (P/N: HNB30310) compass to the instrument handle
P/N: HNB30310

Transport case for C Series instruments and accessories
P/N: HQU97000

Stylus for use with the Trimble C5 total station (pack of 3)
P/N: 571225539
Instrument Tracking


The L2P module in conjunction with Alltrak software gives you real time tracking based on time or distance and allows you to easily locate lost, stolen or missing equipment. This is a service part upgrade for any S5/S7/S9/S9HP instrument and needs to be paired with the Trimble L2P Plan (103500-00).
P/N: U8001

The L2P module in conjunction with Alltrak software gives you real time tracking based on time or distance and allows you to easily locate lost, stolen or missing equipment. This is a service part upgrade for any S3/S6/S8/VX instrument and needs to be paired with the Trimble L2P Plan (103500-00).
P/N: U700X*
*X varies by model
1 = S6 DR Plus Robotic
2 = S6 DR Plus Servo
3 = S3 DR Robotic
4 = S3 DR Servo
5 = S8 HP, S8 DR Plus, VX DR Plus Robotic
6 = S8 HP, S8, DR Plus, VX DR Plus Servo

The L2P module in conjunction with Alltrak software gives you real time tracking based on time or distance and allows you to easily locate lost, stolen or missing equipment. This is a service part upgrade for any C5 instrument and needs to be paired with the Trimble L2P Plan (103500-00).
P/N: U7008
TCU


Kit contains case, robotic holder model 2 with radio, battery and pole bracket for use with Trimble CU controller.
P/N: SLSU-S2026
Compatible with TCU5, TCU3

For using the TCU robotically with a Robotic instrument or GNSS receiver. Includes 2.4 GHz radio for connecting to instruments. Pole mount sold separately.
P/N: 58088001
Compatible with: TCU5, TCU3

10.8V, 6500mAh
Lithium Ion battery for use with Trimble SX10 and S Series instruments, and TCU Robotic Holder.
P/N: 99511-30
Compatible with: TCU5, TCU3

Pole bracket for standard rod for the TCU Robotic and GPS holder.
P/N: 58211001
Compatible with: TCU5, TCU3

Replacement screen protector for Trimble TCU5
P/N: 51258001
Compatible with: TCU5

For use with the TCU5 model 2 office dock or model 2 robotic holder to connect to a PC.
P/N: 53099032
Compatible with: TCU5

12 V Power supply for TCU office dock or Robotic/GNSS holder. For indoor use only. Comes with adapters for worldwide use.
P/N: 51697-00
Compatible with: TCU5, TCU3

Case for the TCU Robotic holder and associated accessories.
P/N: 58383001
Compatible with TCU5, TCU3

0.18 m, Hirose 6 pin to USB Adapter
For use with USB stick or compact flash card reader.
P/N: 73841019
Compatible with: TCU5, TCU3

Stylus for use with the TCU5
P/N: 121355-01-1
Compatible with: TCU5

Replacement stylus tips for TCU5 Stylus - Pack of 5
P/N: 119542-GEO
Compatible with: TCU5

Office cradle for TCU controller. Requires power supply (P/N: 51697-00) and USB cable for connecting to PC (P/N: 73840019).
P/N: 58252019
Compatible with: TCU5, TCU3

10 Pack. Replacement screen protector for TCU Model 3 controllers.
P/N: 51025010
Compatible with: TCU3

Stylus for use with the TCU (pack of 3).
P/N: 571225539
Compatible with: TCU3

For use with the TCU3 model 1 office dock or model 1 robotic holder to connect to a PC.
P/N: 73840019
Compatible with: TCU3

For using the TCU3 with a GNSS receiver. Pole mount sold separately.
P/N: 58317019