The padded hand strap for the TSC7 can sit on either side of the controller depending on personal preference. The hand strap rings can be used to attach the shoulder sling.

P/N: 121351-01-1

The shoulder sling provides a convenient way of carrying the TSC7. The shoulder sling can be attached to either of the hand strap mount points depending on personal preference. It is possible to attach two shoulder slings creating a light harness. The shoulder sling can also attach to the hand strap.

P/N: 121344-01-1

This stylish bag fits a TSC7. The bag is made out of Cordura 1000 Denier with padding. It has 2 internal bags for spare batteries, a business card holder, pencil holders. The shoulder sling can be mounted right or left at the bottom of the bag.

P/N: 121354-01-1

Hard case for TSC7 controller and accessories including 360 Prism

Case contains spaces for:

• TSC7 controller, pole bracket, power cable, dual slot battery charger and 2 spare batteries.
• 2 x Dual slot chargers + power cables
• Trimble 360 Prism (MT1000, AT360, R10 360 or VX&SSeries360)
• 1 x MT1000/R-Series Receiver battery
• 2 x Total station batteries
• 2 x Spare antenna slots

Outer Case Dimensions: 466mm x 351mm x 286mm (18.36” x 13.82” x 11.26”)

P/N: 121360-01-1

Consists of a pole-facing component and a controller-facing component, both connected with a spare connector as used with other Trimble mounting products. The pole component is compact enough to fit into a 10 cm (4") pipe for storage. The controller-facing component features an arm which can be set up for left- or right-hand usage.

P/N: 121349-01-1

The desktop hub includes a USB cable and power supply. It provides:

• 1 Display Port, which supports a single 2K monitor (up to 2560 x 1600 x 30 fps)
• 1 DVI-I and 1 HDMI port, which support dual monitors (up to 2048 x 1152 x 60 fps)
• 1 Gigabit Ethernet port for wired access at ultra-fast speeds
• 3 USB 3.0 SuperSpeed ports for the latest peripherals
• 1 USB 3.0 powered port for fast device charging
• 1 Audio In/Out port for mics, speakers, and earphones
• An Integrated Lock Slot which accommodates security locks to safeguard equipment

P/N: 121345-01-1

The standard boot for the TSC7 controller. It is available as a user-replaceable accessory in case of damage.

P/N: 121330-02-1

An alternative boot with 2 USB ports.

P/N: 121330-01-1

This AC adapter has all international connectors included. It is for the TSC7 controller and the external battery charger.

P/N: 121341-00-1

This is a China only cord. It is for the TSC7 controller and the external battery charger.

P/N: 121341-07-1

Vehicle adapter for 12V.

P/N: 104980-01-1

One set of 2 batteries.

P/N: 121320-01-1

Charger for one set of 2 batteries.

P/N: 121343-01-1

The charger for one set of 2 batteries, including the international power cord. Does not include batteries.

P/N: 121348-01-1

The charger for one set of 2 batteries, including the international power cord and one set of 2 batteries.

P/N: 121358-01-1

Glass screen protector, cleaning cloth, alcohol wipe and dust remover. Trimble recommends always using a screen protector.

P/N: 121340-01-1

Capacitive stylus with tether.

P/N: 121355-01-1

Trimble EMPOWER robotic radio module to connect with total stations.

P/N: 110238-00-1

Trimble EMPOWER asset tracking module integrates Barcode imager functionality with EMPOWER-enabled handheld devices.

P/N: 110255-00-1

Trimble EMPOWER asset tracking module for North American frequencies integrates Barcode imager and/or Ultra-High Frequency (UHF) RFID reader functionality with EMPOWER-enabled handheld devices.

P/N: 110236-00-1

 

Trimble EMPOWER asset tracking module for European frequencies integrates Barcode imager and/or Ultra-High Frequency (UHF) RFID reader functionality with EMPOWER-enabled handheld devices.

P/N: 111974-00-1

1.0 m (DB9 to DB9).

P/N: 82761-00

The padded hand strap for the TSC5 can sit on either side of the controller depending on personal preference. The hand strap rings can be used to attach the shoulder sling.

P/N: 121351-01-1

The shoulder sling provides a convenient way of carrying the TSC5. The shoulder sling can be attached to either of the hand strap mount points depending on personal preference. It is possible to attach two shoulder slings creating a light harness. The shoulder sling can also attach to the hand strap.

P/N: 121344-01-1

Includes a clear PVC business card holder, front zippered mesh pocket, rear nylon pocket with velcro closure to store a field notebook, interior mesh pocket and velcro loop, 2 handle straps for carrying and 2 D rings for attaching an optional shoulder sling.

P/N: 121986-01-GEO

The TSC5 controller simply snaps into the lock. To remove, squeeze and pull up on the latch. This part is used in combination with
part number 121951-01-GEO, which includes an adjustable arm and quick release pole clamp.

P/N 121952-01-GEO

This part is compatible with both the TSC5 Pole Mount Bracket and the TSC7 Pole Mount Bracket.
The attachable arm includes 3 options for attaching to the pole mount bracket.
The pole clamp part (with the bracket/arm and TSC5 detached) remaining on the pole fits inside a 10 cm (4”) tube.

P/N: 121951-01-GEO

International AC Power Adapter Charger Kit (includes 45W wall charger (58X46X28mm) with USB-C PD female port,
NA plug with regional adapters (EU,UK,SAA), and a USB-C (male) to USB-C (male) cable for charging and data transfer - 5 Pack.
The cable can be connected to the AC Adapter and TSC5 for charging, or from TSC5 controller to a computer for data transfer.

P/N: 121921-GEO

USB 3.1 Type-A (male) to USB-Type-C (male) data transfer cable (3 feet) - 10 Pack.

P/N: 114955-GEO

The desktop hub includes a USB cable and power supply. It connects to the TSC5 controller with the USB cable.
It provides:

• • 1 Display Port, which supports a single 2K monitor (up to 2560 x 1600 x 30 fps)
• • 1 DVI-I and 1 HDMI port, which support dual monitors (up to 2048 x 1152 x 60 fps)
• • 1 Gigabit Ethernet port for wired access at ultra-fast speeds
• • 3 USB 3.0 SuperSpeed ports for the latest peripherals
• • 1 USB 3.0 powered port for fast device charging
• • 1 Audio In/Out port for mics, speakers, and earphones
• • An Integrated Lock Slot which accommodates security locks to safeguard equipment

P/N: 121345-01-1

This USB-C PD 60 W vehicle charger is a T100 accessory which is also compatible with TSC5.

P/N: 121718-BLK-GEO

This adapter is a T100 accessory which is also compatible with TSC5.

P/N: 120532-BLK-GEO

 TSC5 Glass Screen Protector (Standard Ultra Clear) - 10 Pack, includes a glass screen protector, cleaning cloth, alcohol wipe and dust removal sticker. Trimble recommends always using a screen protector.

P/N: 115896-GEO

Capacitive stylus with tether for the TSC5, T7 or TSC7 controller.

P/N: 121355-01-1

Trimble EMPOWER robotic radio module to connect with total stations.

P/N: 110238-00-1

EM120 2.4 GHz Antenna - 10 Pack.

P/N: 115189-GEO

Trimble EMPOWER asset tracking module integrates Barcode imager functionality with EMPOWER-enabled handheld devices.

P/N: 110255-00-01

Trimble EMPOWER asset tracking module for North American frequencies integrates Barcode imager and/or Ultra-High Frequency (UHF)
RFID reader functionality with EMPOWER-enabled handheld devices.

P/N: 110236-00-1

Trimble EMPOWER asset tracking module for European frequencies integrates Barcode imager and/or Ultra-High Frequency (UHF)
RFID reader functionality with EMPOWER-enabled handheld devices.

P/N: 111974-00-1

GNSS receiver for sub-meter positioning.

P/N: 110221-00-1

 

P/N: 82758-10

P/N: 82756-20

P/N: 82756-00

P/N: 82754-10

P/N: 82754-00

P/N: 82755-00

P/N: 82753-00

P/N: 82750-00

P/N: 82752-00

P/N: 82758-00

P/N: 82759-00

P/N: 82760-00

1.0 m (DB9 to DB9)

P/N: 82761-00

P/N: 82763-00

P/N: 82764-00

P/N: 82766-00

P/N: 82768-00

P/N: 82769-00

Kit contains case, robotic holder model 2 with radio, battery and pole bracket for use with Trimble CU controller.

P/N: SLSU-S2026

Compatible with: TCU5, TCU3

For using the TCU robotically with a Robotic instrument or GNSS receiver. Includes 2.4 GHz radio for connecting to instruments. Pole mount sold separately.

P/N: 58088001

Compatible with: TCU5, TCU3

10.8V, 6500mAh

Lithium Ion battery for use with Trimble SX10 and S Series instruments, and TCU Robotic Holder.

P/N: 99511-30

Compatible with: TCU5, TCU3

Pole bracket for standard rod for the TCU Robotic and GPS holder. 

P/N: 58211001

Compatible with: TCU5, TCU3

Replacement screen protector for Trimble TCU5

P/N: 51258001

Compatible with: TCU5

For use with the TCU5 model 2 office dock or model 2 robotic holder to connect to a PC.

P/N: 53099032

Compatible with: TCU5

12 V Power supply for TCU office dock or Robotic/GNSS holder. For indoor use only. Comes with adapters for worldwide use.

P/N: 51697-00

Compatible with: TCU5, TCU3

Case for the TCU Robotic holder and associated accessories.

P/N: 58383001

Compatible with: TCU5, TCU3

0.18 m, Hirose 6 pin to USB Adapter

For use with USB stick or compact flash card reader. 

P/N: 73841019

Compatible with: TCU5, TCU3

Stylus for use with the TCU5

P/N: 121355-01-1

Compatible with: TCU5

Replacement stylus tips for TCU5 Stylus - Pack of 5

P/N: 119542-GEO

Compatible with: TCU5

Office cradle for TCU controller. Requires power supply (P/N: 51697-00) and USB cable for connecting to PC (P/N: 73840019).

P/N: 58252019

Compatible with: TCU5, TCU3

10 Pack. Replacement screen protector for TCU3 controllers.

P/N: 51025010

Compatible with: TCU3

Stylus for use with the TCU3 (pack of 3).

P/N: 571225539

Compatible with: TCU3

For use with the TCU3 model 1 office dock or model 1 robotic holder to connect to a PC.

P/N: 73840019

Compatible with: TCU3

For using the TCU3 with a GNSS receiver. Pole mount sold separately.

P/N: 58317019

Compatible with: TCU3

P/N: 88142-01

P/N: 115457-50

Soft carry case.

P/N: 93598-10

P/N: 116455

Li-Ion, INDUS, 1S4P, 3.7 V, 6400 mAHr, 63 x 54.5 x 18.5 mm

P/N: 106661-40

P/N: 116795

P/N: 114821

P/N: 114823

 

Hand strap kit for the back of the TDC600 for extra handling security whilst on the job.

P/N: 118832

Wrist strap for extra security when working in the field.

P/N: 109774

User-replaceable, rechargeable battery (8,000 mAh)

P/N: 124461-10

TDC600 Dual battery, BA7800 3.8V 8000mAh, Gang Charger with AC Adapter

This external dual battery & gang charging accessory assists users who may have longer workday needs or to help with campaigns where teams are deployed with the same shared TDC600 hardware and cannot afford downtime. A dual charger can also help quickly charge large stocks of 
batteries that have been safely stored.

P/N: 118835-00

Use this power supply to recharge your battery pack. The kit contains an AC adapter cable with wall plugs for the US, Europe, UK, and Australia/New Zealand.

P/N: 118420

Range pole bracket provides the ability for users to operate in landscape or portrait modes to improve workflows that require forms/data to be entered. Ideal when using the TDC600 with an external receiver like the Catalyst DA1 or R2 receiver for a convenient all-on-the-pole solution.

P/N: 117057-GEO-BKT

Bracket for the mechanical mounting of the Trimble TDC600 controller onto a Trimble S Series Total Station. Connection to the S Series instrument from the TDC600 for onboard operation is via Bluetooth.

P/N: SSERIES-CB-10

GNSS antenna with MMCX connector and 1.5m antenna cable

P/N: 109766

P/N: 118831

GNSS antenna with MMCX connector and 1.5 m antenna cable.

P/N: 109766

This stylus tethers to the Nomad 5 handheld. Stylus kit contains: 1 x stylus, 2 x rubber tips, 1 x lanyard.

P/N: 121355-01-1

Use this power supply to recharge your battery pack. The kit contains an AC adapter cable with wall plugs for the US, Europe, UK, and Australia/New Zealand.

P/N: 104972-01-1

Use this cable to provide power to the Nomad 5 handheld when working in a vehicle, or to charge the handheld off vehicle power. The adapter is suitable for use with standard 12 volt vehicle power.

P/N: 104980-01-1

Trimble EMPOWER asset tracking module integrates Barcode imager and/or Ultra-High Frequency (UHF) RFID reader functionality with EMPOWER-enabled handheld devices.

P/N: 110236-00-1

 

Trimble EMPOWER asset tracking module integrates Barcode imager and/or Ultra-High Frequency (UHF) RFID reader functionality with EMPOWER-enabled handheld devices.

P/N: 111974-00-1

Trimble EMPOWER asset tracking module integrates Barcode imager functionality with EMPOWER-enabled handheld devices.

P/N: 110255-00-1

Trimble EMPOWER GNSS module to get integrated sub-meter positioning in the field supporting multiple GNSS constellations and Trimble correction sources.

P/N: 110221-00-1

Vehicle suction mount with quick disconnect, ball mount.

P/N: 121148-01-1

Use this bracket to attach your Nomad 5 handheld to a vehicle dashboard. The kit contains a vehicle hard mount with quick disconnect, ball mount.

P/N: 121147-01-1

Soft fabric carry case with shoulder strap.

P/N: 121154-01-1

Li-Ion, 10.8 V, 3200 mAh (35 Wh), 89.0 x 69.3 x 28.9 mm.

P/N: 116315-01-1

Battery gang charger - simultaneously charge the device and a spare battery at the same time. Requires AC adapter (P/N 104972-01-1) which is not included.

P/N: 116434-1

 

Handstrap is adjustable and can easily be attached to the mount points on the handheld, and has a built-in stylus holder.

P/N: 116568-1

Range pole mount, contains device cradle, quick release, and pole clamp. Ideal when using handheld with an external receiver like the Catalyst DA1 antenna or R2 receiver for a convenient all-on-the-pole solution.

P/N: 121149-01-1

Glass screen protector. This kit includes installation instructions, an applicator card, and a screen cleaning cloth.

P/N: 116325-01-1

The standard boot for the Nomad 5 handheld. It is available as a user-replaceable accessory in case of damage.

P/N: 116432-1

T100 Screen Protector (Standard Ultra Clear) - includes a glass screen protector, cleaning cloth, alcohol wipe and dust removal sticker. Trimble recommends always using a screen protector.

P/N: 120516-GEO

This adapter is also compatible with TSC5.

P/N:  120532-GEO

Use this power supply to recharge your battery pack. The kit contains an AC adapter cable with wall plugs for the US, Europe, UK, and Australia/New Zealand.

P/N: 124341-GEO

Capacitive stylus with tether for the T100 tablet.

P/N 120524-GEO

Replacement stylus tips for T100 Stylus - Pack of 5 and removal tool for easy change.

P/N: 121589-GEO

USB-C PD 60 W vehicle charger.

 

P/N: 121718-GEO

P/N: 122906-GEO

P/N: 120531-GEO

P/N: 107727-01-GEO

Strap for ease of use in field.

 

P/N:121990-GEO 

Office cradle for T100 tablet.

P/N: 121427-GEO

P/N 123247-GEO

Robotic radio module to connect with total stations.

P/N: 110238-00-1

RFID reader for North American frequencies with optical barcode reader.

P/N: 110236-00-1

RFID reader for European frequencies with optical barcode reader.

 

P/N: 111974-00-1

GNSS receiver for sub-meter positioning.

P/N: 110221-00-1

Accommodates the T10 tablet including external keyboard.

P/N: 114124

Rubber hand strap.

P/N: 114108

Detachable keyboard, uses T10 tablet docking connector. Does not require a Bluetooth connection / batteries.

P/N: 114116 - US
P/N: 114118 - German

Vehicle mount with keyboard with quick disconnect, ball mount and double U-Bolt base. Uses table docking connector. Does not require a Bluetooth connection / batteries.

P/N: 114123

Office docking station, uses T10 tablet docking connector. Offers connection to ethernet (LAN), external monitor (HDMI) and additional USB ports. Requires AC adapter (P/N 114112) which is not included.

P/N: 114119

Range pole mount, contains cradle with quick release and pole clamp.

P/N: 114121

Vehicle mount cradle with quick disconnect, ball mount and double U-Bolt base.

P/N: 114122

Battery charging kit - single battery, includes power cord.

P/N: 114113

Li-Ion, INDUS, 3S1P, 11.4 V, 5400 mAHr, 123 x 147 x 12.4 mm.

P/N: 114110

Li-Ion, INDUS, 3S2P, 11.4 V, 8000 mAHr, 123 x 147 x 18.4 mm.

P/N: 114111

AC adapter cable with wall plugs for the US, Europe, UK, Australia/New Zealand.

P/N: 114120

Automobile power adapter, output voltage 65W / 19V, input 11-16V DC.

P/N: 114115

AC/DC Power Adapter (19V, 3.42A, 65W) with power cord.

P/N: 114112

Battery gang charger - simultaneously charge up to six batteries, includes power cord.

P/N: 114114

Antenna for internal 2.4 GHz radio module

P/N: 91486-00

Battery operated digital pen: 9.7 mm x 140.7 mm, weighs <25 g. Standard package: 1 digital pen, 1 x AAAA battery, 1 x coil lanyard, 1 x pen clip.

P/N: 114107

Padded for comfort, provides convenient mobile operation. Strap is adjustable and can be attached to the mount points on the tablet.

P/N: 114125

10.1", anti-glare, single sheet of films.

P/N: 144109

Glass screen protector, cleaning cloth, alcohol wipe and dust remover. Trimble recommends always using a screen protector.

P/N: 115895-01

Contains device mount, quick release, and pole clamp.

P/N: 121648-01

This stylus tethers to the Trimble T7 tablet. A stylus kit contains: 1 x stylus, 2 x rubber tips, 1 x lanyard.

P/N: 121355-01-1

This power supply is for the T7 tablet and the external battery charger. The kit contains an AC adapter cable with wall plugs for the US, Europe, UK, and Australia/New Zealand.

P/N: 104972-01-1

Adapter for 12V Use this cable to provide power to the T7 tablet when working in a vehicle, or to charge the handheld off vehicle power. The adapter is suitable for use with standard 12 volt vehicle power.

P/N: 104980-01-1

One set of 2 batteries for the T7 tablet.

P/N: 121320-01-1

 

Charger for one set of 2 batteries for the T7 tablet. Requires AC adapter (P/N 104972-01-1) which is not included. Does not include batteries.

P/N: 121343-01-1

The charger for one set of 2 batteries for the T7 tablet including the international power cord. Does not include batteries.

P/N: 121348-01-1

The charger for one set of 2 batteries for the T7 tablet including the international power cord and one set of 2 batteries for the T7 tablet

P/N: 121358-01-1

The desktop hub includes a USB cable and power supply. It connects to the T7 tablet with the USB cable. It provides:

• 1 Display Port, which supports a single 2K monitor (up to 2560 x 1600 x 30 fps)
• 1 DVI-I and 1 HDMI port, which support dual monitors (up to 2048 x 1152 x 60 fps)
• 1 Gigabit Ethernet port for wired access at ultra-fast speeds
• 3 USB 3.0 SuperSpeed ports for the latest peripherals
• 1 USB 3.0 powered port for fast device charging
• 1 Audio In/Out port for mics, speakers, and earphones
• An Integrated Lock Slot which accommodates security locks to safeguard equipment

P/N: 121345-01-1

The padded hand strap for the T7 tablet can sit on either side of the controller depending on personal preference. Attach one end of the hand strap to the top hand strap slot first and secure it. Then attach the other end to the bottom hand strap slot, adjusting it as needed to the size of your hand. Note - The hand strap rings can be used to attach the shoulder sling.

P/N: 121351-01-1

The shoulder sling provides a convenient way of carrying the T7 tablet. The shoulder sling can be attached to either of the hand strap mount points depending on personal preference. It is possible to attach two shoulder slings creating a light harness. The shoulder sling can also attach to the hand strap.

P/N: 121344-01-1

This stylish bag fits a T7 tablet. The bag is made out of Cordura 1000 Denier with padding. It has 2 internal bags for spare batteries, a business card holder, pencil holders. The shoulder sling can be mounted right or left at the bottom of the bag.

P/N: 121354-01-1

This adapter provides a DB-9 serial cable connection from a T7 tablet USB port.

P/N: 91475-00

GNSS antenna with MMCX connector and 1.5 m antenna cable.

P/N: 109766

Trimble EMPOWER GNSS module to get integrated sub-meter positioning in the field supporting multiple GNSS constellations and Trimble correction sources.

P/N: 110221-00-1

Trimble EMPOWER asset tracking module integrates Barcode imager and/or Ultra-High Frequency (UHF) RFID reader functionality with EMPOWER-enabled handheld devices.

P/N: 110236-00-1

Trimble EMPOWER asset tracking module integrates Barcode imager and/or Ultra-High Frequency (UHF) RFID reader functionality with EMPOWER-enabled handheld devices.

P/N: 111974-00-1

Trimble EMPOWER asset tracking module integrates Barcode imager functionality with EMPOWER-enabled handheld devices.

P/N: 110255-00-1

Trimble EMPOWER robotic radio module to connect with total stations

P/N: 110238-00-1

Attach the T7 tablet to a vehicle dashboard using this bracket. Contains a device mount, quick release, and vehicle mount.

P/N: 121647-01

A replacement I/O boot with DC power input, 2 x USB 3.0 host, 3.5 mm audio/headset jack.

P/N: 121644-01-1

(TNC to SMB - 1.5 m)

Use this cable to connect a Trimble Zephyr, Tornado or Tempest GNSS antenna to your Geo 7X.

P/N: 70800-15

(TNC to SMB - 5 m)

Use this cable to connect a Trimble Zephyr, Tornado or Tempest GNSS antenna to your Geo 7X handheld. This is a 5 m cable for users who need to elevate the antenna.

P/N: 70800-50

 (Mini-A to DE9-M)

This USB to serial converter cable provides an external serial port. The 9-pin DE-9 serial port can be used to input real-time corrections, or to connect a laser rangefinder or other external device to the handheld, or it can be used to output NMEA-0183 data to another device.

Note: Outputting NMEA-0183 data requires the NMEA output option to be activated on the handheld.

P/N: 88049-03

(1.8 m, Type-A to Mini-B)

Use this USB data cable to connect the Geo 7X to your office computer, for upload and download of data.

P/N: 88015-00

(15 V 1A output)

Use this power supply to recharge your battery pack. The kit contains plug adapters for the U.K., Europe, Australasia and the United States.

P/N: 88014-00

(15V 1A output)

Use this cable to provide power to the Geo 7X when working in a vehicle, or to charge the handheld off vehicle power. The adapter is suitable for use with standard 12 volt vehicle power sockets.

P/N: 88056-00

Li-Ion, INDUS, 3S1P, 11.1 V, 2500 mAHr, 155x61x27.1 mm

With an additional, fully-charged battery pack on hand, you can swap battery packs in the field in a matter of seconds to continue working. The battery pack integrates a 2500 mAH Li-Ion battery with smart charging circuitry and convenient capacity remaining LED indicators.

P/N: 88004-04

 

The stylus, which fits neatly into the stylus holder on the back of the Geo 7X, also has an attachment point for the tether cord. Stylus kit contains one (1) stylus and one (1) tether cord.

P/N: 88055-13

 

Using Wavelight™ technology to enable integrated remote feature location and measurement workflows directly in Trimble field applications, the Geo 7 series rangefinder module adds laser precision distance measurement to the Geo 7X.

P/N: 93879-00

10-pack of fitting tool accessories for the Geo 7 series rangefinder module.

P/N: 94036-10

Carry pouch for the Geo 7X.

P/N: 93598-01

Customized rugged transportation case for carrying and storing a Geo 7X and its additional accessories. The custom-formed interior includes compartments for the handheld (including rangefinder module), external antenna, brackets, batteries, power adapter, cables, and additional storage zones for extra miscellaneous materials.

P/N: 94558

This strong yet lightweight carbon fiber range pole is ideal for use with the Geo 7X when using an external antenna. It has a 5/8" screwthread at top, to attach the antenna, and is compatible with all of Trimble's handheld range pole brackets, so you can use your whole system on a pole. For easy transportation and storage, the pole is split into two pieces, which quickly and easily screw together.

P/N: 53861

Range pole bracket with quick-release tilt and tilt-adjustment mechanism.

P/N: 93599-00

Telescopic carbon fiber monopole (1.3 m) with spring-loaded metal tip.

P/N: 88142-01

 

Monopole bracket with quick-release tilt mechanism.

P/N: 93576-00

Carbon fiber monopole kit for the Geo 7X.

(Geo 7X handheld NOT included)

P/N: 94916-00

Shock absorbing replacement tip for carbon fiber monopole (PN 88142-xx)

P/N: 94678

This adapter is used together with the GPS quick release (P/N 19493), to allow the GPS antenna to be easily moved from one 5/8" screwthread to another. It is ideal if you frequently need to move your antenna from one vehicle to another, or between vehicle, backpack and/or pole mounts. The combined height of the GPS quick release and the GPS quick release adapter is 10 cm.

P/N: 19487

This Quick Release accessory is used together with the GPS quick adapter (P/N 19487), to allow the GPS antenna to be easily moved from one 5/8" screwthread to another. It is ideal if you frequently need to move your antenna from one vehicle to another, or between vehicle, backpack and/or pole mounts. The combined height of the GPS quick release and the GPS quick release adapter is 10 cm.

P/N: 19493

The dual frequency Zephyr antenna contains advanced technology for extremely low multipath, outstanding low elevation tracking, and sub-millimeter phase center accuracy. The Zephyr antenna has an integrated screw thread for mounting on a range pole or backpack for your convenience.

P/N: 85320

High quality GPS antenna (GPS L1, GLONASS L1, SBAS capable) that is resistant to signal interference and multipath. Ideal for all mapping applications, it is especially useful in difficult environments such as under canopy and in urban canyons. Can be mounted on a backpack or range pole to raise it above the body which minimizes interference and the blocking of signals, resulting in a higher yield of positions and the best possible performance. Integrated magnets on the bottom of the antenna allow it to be directly mounted on the roof of a vehicle.

Comes with TNC antenna cable connector. You must also order the appropriate antenna cable for use with the Tempest antenna; the antenna is not shipped with a cable.

P/N: 57973-10

Dual frequency GNSS antenna (GPS L1/L2, GLONASS L1/L2). Contains advanced technology for extremely low multipath, outstanding low elevation satellite tracking, and high phase center accuracy. Can be mounted on a range pole along with the Geo7X for a convenient all-on-the pole solution. An optional magnetic mount allows it to be directly mounted on the roof of a vehicle. Recommended external antenna option for the Geo7X with H-Star enabled.

Comes with TNC antenna cable connector. You must also order the appropriate antenna cable for use with the Tornado antenna; the antenna is not shipped with a cable.

P/N: 57972-20

Highly portable GNSS (GPS & GLONASS compatible) antenna. Ideal for use in scenarios requiring a small body-worn antenna, or when operating a GNSS receiver from within a vehicle for basic navigation purposes. You can wear the miniature antenna in a specially designed cap for mobile applications, or you can use the integrated magnetic mount to attach it to the roof of your vehicle.

P/N: 89185-00

Covers for the external antenna connector.

P/N: 88140-02

This purpose-built baseball cap features a small pouch for concealing an external patch antenna.

P/N: 44309

 (2-pack)

Use these high quality ScreenGuardz anti-glare screen protectors to reduce reflections from the screen when working in bright sunlight and various outdoor lighting conditions, and to prevent your handheld screen from becoming scratched or marked. This kit includes installation instructions, and applicator card, and a screen cleaning cloth.

P/N: 93601-02

This kit contains a replacement SD card slot door cover, SIM card slot door cover and USB door cover.

P/N: 88130-02

Adjustable hand strap kit.

P/N: 93773-03

GNSS antenna with MMCX connector and 1.5 m antenna cable.

P/N: 109766

Use this pole mount bracket to attach the TDC100 to a range pole.Ideal when using handheld with an external receiver like the R2 for a convenient all-on-the-pole solution.

P/N: 109217-00

Battery cover for the standard capacity battery of the TDC100.

P/N: 109772

Battery cover for the enhanced capacity battery of the TDC100.

P/N: 109773

Li-Ion, INDUS, 1S3P, 3.7 V, 4800 mAH (17.76 Wh), 63 x 54 x 13.5 mm

Enhanced capacity battery.

P/N: 106661-20

Li-Ion, INDUS, 1S2P, 3.7 V, 3100 mAHr, 63 x 54 x 9 mm

Standard capacity battery.

P/N: 106661-10

AC adapter to recharge TDC100. The kit contains plug adapters for operation in the U.K., Europe, Australia and the United States.

P/N: 109765

Trimble branded wrist strap.

P/N: 109774

USB A Male to Micro-USB B

P/N: 109236

P/N: 110271

Enhanced capacity battery and battery cover kit to upgrade battery capacity of the TDC100 Wi-Fi model.

P/N: 109957