Whitepapers

Trimble SX12 Laser Pointer

Issue link: https://geospatial.trimble.com/en/resources/i/1497400

Contents of this Issue

Navigation

Page 5 of 8

Trimble SX12 Laser Pointer White Paper 6 Laser/EDMWorkflowinStandardModeforMeasureTopo When the laser is positioned on the desired object of interest and the user initiates a measurement (1), the instrument will turn off the LP and re-aim so that EDM lands where LP was and then measure the distance (2), then the instrument returns to the original position with the laser pointer turned back on (3). Laser / EDM Workflow in Tracking Mode for Measure Topo Tracking mode is intended for fast, constant measurements in applications where potential degradation in accuracy is acceptable in order to achieve the faster measurement speed. To achieve this faster measurement, no positioning adjustment is done by the instrument, so any misalignment between the laser pointer and the EDM beam will be incurred in the measurement.

Articles in this issue

view archives of Whitepapers - Trimble SX12 Laser Pointer