Whitepapers

Trimble SX12 Laser Pointer

Issue link: https://geospatial.trimble.com/en/resources/i/1497400

Contents of this Issue

Navigation

Page 7 of 8

Trimble SX12 Laser Pointer White Paper 8 Step Trimble Access Screenshot 1 The initial stakeout screen has a "Mark Point" button where you would previously have "Accept" You can use the joystick or video forms to navigate the instrument to the stake point, or to shortcut all of this, tap the "Turn" soft key to have the instrument position itself at the required Horizontal and Vertical angle. During this step, the laser pointer will heartbeat flash 2 After navigating to the point and with deltas you are happy with, tap the "Mark point" button. 3 This will put the instrument into standard mode and put the laser pointer on the EDM measuring location. At this point, the laser pointer is on solid If the deltas are unacceptable, readjust, then tap "Measure" to get an updated deltas. Tap "Accept" when happy to store the point

Articles in this issue

view archives of Whitepapers - Trimble SX12 Laser Pointer